Overview - Starter, Vehicles With 4-Cylinder Engine

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Starter, Vehicles With 4-Cylinder Engine Exploded View

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Tightening specification:
  - Vehicles with manual transmission. Refer to TRANSMISSION, REMOVING AND INSTALLING [For transmission(s) 0CK] [For engine(s) CYNB,CPNB] .
  - Vehicles with automatic transmission. Refer to TRANSMISSION TIGHTENING SPECIFICATIONS [For transmission(s) 0BK] .
  - Vehicles with DSG^® transmission. Refer to TRANSMISSION TIGHTENING SPECIFICATIONS [For transmission(s) 0BK] .
Spacer Sleeve
Starter
- Removing and installing. Refer to STARTER, REMOVING AND INSTALLING .
B+ Terminal
Nut
- 15 Nm
Connector
Bolt
- Tightening specification:
  - Vehicles with manual transmission. Refer to TRANSMISSION TIGHTENING SPECIFICATIONS [For transmission(s) 0BK] .
  - Vehicles with automatic transmission. Refer to TRANSMISSION TIGHTENING SPECIFICATIONS [For transmission(s) 0BK] .
  - Vehicles with DSG^® transmission. Refer to TRANSMISSION TIGHTENING SPECIFICATIONS [For transmission(s) 0BK] .