Rear Wiper Motor: Inspection

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Connect the battery to the wiper motor connector and confirm that wiper motor operates.

Fig 1: Connecting Battery To Wiper Motor Connector
Courtesy of SUBARU OF AMERICA, INC.
Connect the battery to the connector terminal, run the motor and disconnect the terminal connection, and stop the wiper motor in mid motion.

Fig 2: Connecting Battery To Connector Terminal
Courtesy of SUBARU OF AMERICA, INC.
Connect the battery and confirm that the motor stops at the automatic stop position after the motor operates at low speed.

Fig 3: Inspecting Motor Stops At Automatic Stop Position After Motor Operates At Low Speed
Courtesy of SUBARU OF AMERICA, INC.