Rear Washer: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the roof spoiler. (Model with roof spoiler) < Ref. to REMOVAL , Roof Spoiler. >
Remove the high-mounted stop light. < Ref. to REMOVAL , High-mounted Stop Light. >
Remove the washer nozzle.
CAUTION: Be careful not to scratch the rear gate panel during removal.
1. Using a driver with a narrow tip, etc., push out the nozzle craw from the rear side of rear gate panel.
  
  Fig 1: Pushing Out Nozzle Craw From Rear Side Of Rear Gate Panel Using Driver With Narrow Tip
  Courtesy of SUBARU OF AMERICA, INC.
2. Hold the washer nozzle from the outer side of the rear gate, and pull the washer nozzle.
  
  Fig 2: Washer Nozzle
  Courtesy of SUBARU OF AMERICA, INC.
3. Remove the washer hose (B) from washer nozzle (A).
  
  Fig 3: Washer Hose And Washer Nozzle
  Courtesy of SUBARU OF AMERICA, INC.