Front Wiper Motor and Link: Inspection

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Check that the wiper motor operates at low speed when the battery is connected to the connectors terminal as shown in the illustration.

Fig 1: Checking Wiper Motor Operates At Low Speed
Courtesy of SUBARU OF AMERICA, INC.
Check that the wiper motor operates at high speed when the battery is connected to the connectors terminal as shown in the illustration.

Fig 2: Checking Wiper Motor Operates At High Speed
Courtesy of SUBARU OF AMERICA, INC.
Connect the battery to the terminals to the connector, run the motor at low speed, and then disconnect the terminal to stop the wiper motor in mid motion.

Fig 3: Connecting Battery To Terminals
Courtesy of SUBARU OF AMERICA, INC.
Connect the battery and confirm that the motor stops at the automatic stop position after the motor operates at low speed.

Fig 4: Inspecting Motor Stops At Automatic Stop Position After Motor Operates At Low Speed
Courtesy of SUBARU OF AMERICA, INC.