LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 927 (Exhaust System, Emission Controls (CREC, Cred, CREH)) >> 26 Exhaust System, Emission Controls >> Secondary Air Injection System >> Combination Valve, Checking >> Procedure >> Assembling

Combination Valve, Checking: Procedure: Assembling

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Assembly Is Performed In The Reverse Order Of Disassembly, Noting The Following: 

NOTE:

Replace The O-Ring After Removing.

-- Install the Throttle Valve Control Module -J338-. Refer to THROTTLE VALVE CONTROL MODULE -J338-, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals