LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 927 (Exhaust System, Emission Controls (CREC, Cred, CREH)) >> 26 Exhaust System, Emission Controls >> Exhaust Manifold >> Overview - Exhaust Manifold >> Left Exhaust Manifold, Tightening Specifications And Sequence

Left Exhaust Manifold, Tightening Specifications And Sequence

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exhaust Manifold Nuts Tightening Sequence
GWWA26-10142Courtesy of AUDI OF AMERICA, LLC
NOTE:

Replace The Nuts After Removing.

Coat the thread on the nut with hot bolt paste.

-- Tighten The Bolts In Steps In The Sequence Shown: 

Step Nuts Tightening Specification
1.  -1 to 9- Install all the way in by hand.
2.  -1 to 9- 15 Nm
3.  -1 to 9- 25 Nm
scientia non olet · About LEMON Manuals