Double Clamps (Exhaust)
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
-- Install double clamps so that the bolt ends do not project over lower edge of double clamp.
- Installed position: Threaded connections point toward outside.
- Angle -α- = 45°.
-- Install double clamps so that the bolt ends do not project over lower edge of double clamp.
- Installed position: Threaded connections point forward.