LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 924 (Suspension System (Front - Service Information)) >> Front Suspension >> Suspension Strut And Upper Control Arm >> Suspension Strut, Servicing >> Suspension Strut, Servicing, Coil Spring Shock Absorber >> Coil Spring, Removing

Coil Spring, Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA40-10308Courtesy of AUDI OF AMERICA, LLC

-- Place the :VAG1752/1  -1- in the vise.

NOTE:

To prevent damage to the :VAG1752/1  , use protective jaws.

-- Apply tension to the spring compressor in the :VAG1752/1  as illustrated.

GWWA40-10562Courtesy of AUDI OF AMERICA, LLC

-- Pretension the coil spring in the :VAG1752/1  -1- until the upper spring plate with the spring support are free.

-- Remove nut from the piston rod.

-- Remove the individual components of the suspension strut and coil spring with the :VAG1752/1  .

  1. :VAG1752/1 
  2. Ratchet, commercially available
  3. :T10001/7 
  4. :T10001/11 
  5. :T10001/3 
  6. :VAG1752/6 

-- Make sure the coil spring fits correctly inside the :VAG1752/6  -arrow-.

GWWA40-10450Courtesy of AUDI OF AMERICA, LLC
  1. :VAG1752/1 
  2. :VAG1752/6 
scientia non olet · About LEMON Manuals