Suspension Strut, Removing And Installing, Air Spring Damper: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 1331 5-50Nm :VAG1331
- Torque Wrench 1332 40-200Nm :VAG1332
- Torque Wrench 1783 - 2-10Nm :VAG1783
- Torque Wrench 1783 - Open Jaw - 10mm :VAG1783/1
- Wood block (hardwood) 30 x 50 x 1000 mm
- Spreader Tool :3424
- Tensioning Strap :T10038
- Vehicle Diagnostic Tester