Shock Absorber Fork, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Spreader Tool :3424
- Torque Wrench 1331 5-50Nm :VAG1331
- Torque Wrench 1332 40-200Nm :VAG1332
- Tensioning Strap :T10038
- Puller - Ball Joint :T40010A
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Nuts - Coupling Rod
- Bolts - Coupling Rod
- Nut - Tie rod