Pressing Out Bonded Rubber Bushing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- The guide link is removed. Refer to GUIDE LINK, REMOVING AND INSTALLING
-- Mark the upper and lower installed position -arrow- on the bonded rubber bushing -4-.
Use a water-proof marker.
-- Order the special tools as illustrated.
- :VAG1290A punch
- :VW412
- :VW463/2
- Bonded rubber bushing
- Guide link
- :3144
- :VW402
-- Remove the bonded rubber bushing -4- from the guide link -5-.
NOTE:
Hold the guide link steady when removing/installing the bonded rubber bushing.