Control Arm Ball Bearing, Replacing, Wheel Bearing Housing Side: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Press Plate :VW402
- Press Piece - Multiple Use :VW412
- Press Piece - 42mm :VW516
- Press Piece - Reverse Gear Syncro :3296
- Assembly Paste :G 052 109 A2
- The control arm is removed. Refer to CONTROL ARM, REMOVING AND INSTALLING .
NOTE:
Hold track control arm firmly when removing and installing the bonded rubber bushing.