LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 924 (Suspension System (Front - Service Information)) >> Front Suspension >> Drive Axle >> Drive Axle Threaded Connection, Loosening And Tightening >> Loosen the Threaded Connection Between the Drive Axle and Wheel Hub

Loosen the Threaded Connection Between the Drive Axle and Wheel Hub

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA40-10419Courtesy of AUDI OF AMERICA, LLC

-- With vehicle still standing on its wheels, loosen bolt a maximum of 90°, otherwise wheel bearing will be pre-damaged.

-- Lift the vehicle just enough so that the wheels are hanging free.

-- Apply the brakes (a second technician required).

-- Remove the bolt -arrow-.

scientia non olet · About LEMON Manuals