Overview - Sun Shade, AVANT

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Sun Shade, Avant

Courtesy of AUDI OF AMERICA, LLC

Clip
- Quantity: 3
- Insert in the trim panel
- Remove any remaining clips in the sun shade mounting points using the Omega Clip Tool :T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
Rear Lid Lower Trim
- Removing and installing. Refer to LOWER REAR LID TRIM PANEL, REMOVING AND INSTALLING, AVANT .
- Press on until it engages audibly
Sun Shade
- Removing and installing. Refer to SUN SHADE, REMOVING AND INSTALLING, AVANT .
- Clipped in the rear lid lower trim panel
Clip
- Quantity: 2
- Insert in the cover
- Remove clips left in the mounting points of the sun shade and use for installation in the cover
- Replace damaged or deformed clips
Bolt
- 2 Nm
Mount Bracket
- Removing and installing. Refer to SUN SHADE MOUNT, REMOVING AND INSTALLING .
Rear Lid Upper Trim
- Removing and installing. Refer to UPPER REAR LID TRIM PANEL, REMOVING AND INSTALLING .
- Insert first behind the side window frame in the rear lid
- Press on until it engages audibly
Sun Shade Mount
- Removing and installing. Refer to SUN SHADE MOUNT, REMOVING AND INSTALLING .
- Hook into the bracket and press until it audibly engages
Sun Shade Cover
- Removing and installing. Refer to SUN SHADE, REMOVING AND INSTALLING, AVANT .
- Press on until it engages audibly
Clip
- Quantity: 2
- Insert in the cover
- Remove any remaining clips in the sun shade mounting points using the Omega Clip Tool:T40280 . To install, insert into the cover.
- Replace damaged or deformed clips
Bolt
- 3 Nm
- Quantity: 4