Overview - Luggage Compartment Roll Cover
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 4.5 Nm
- Quantity: 2
- Tightening Sequence. Refer to Installing
- Luggage Compartment Cover Motor 1 -V473- /Luggage Compartment Cover Motor 2 -V474-
- Removing and installing. Refer to LUGGAGE COMPARTMENT ROLL COVER, REMOVING AND INSTALLING .
- Cable, adjusting. Refer to RELEASE CABLE FOR THE ROLL COVER, ADJUSTING .
- Bolt
- 2.5 Nm
- Quantity: 4
- Tightening Sequence. Refer to Installing
- Luggage Compartment Cover Guide Rail
- Quantity: 2
- Removing and installing. Refer to LUGGAGE COMPARTMENT ROLL COVER, REMOVING AND INSTALLING .
- Cable, adjusting. Refer to RELEASE CABLE FOR THE ROLL COVER, ADJUSTING .
- Bolt
- 4.5 Nm
- Quantity: 2
- Tightening Sequence. Refer to Installing
- D-Pillar Trim Panel
- Removing and installing. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING, AVANT .
- Driver
- For luggage compartment cover
- Removing and installing. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING, AVANT .
- Install the guide rails
- Nut
- 4.5 Nm
- Tightening Sequence. Refer to Installing