Center Console Attachment
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 1.4 Nm
- Quantity: 2
- Cupholder
- Removing and installing. Refer to CUPHOLDER, REMOVING AND INSTALLING .
- Trim
- For the cupholder
- Removing and installing. Refer to CUPHOLDER, REMOVING AND INSTALLING .
- Attach trim to the cover and press on it until it audibly engages
- Side Trim Panel
- For the center console
- Equipped on some models
- Removing and installing. Refer to FRONT FOOTWELL CENTER CONSOLE TRIM PANEL, REMOVING AND INSTALLING .
- Replace any damaged or deformed clips
- Press the side trim panel back on until it audibly latches.
- Decorative Trim
- For the center console
- Equipped on some models
- Removing and installing. Refer to CENTER CONSOLE COVER, REMOVING AND INSTALLING .
- Side Trim Panel
- For the center console
- Equipped on some models
- Removing and installing. Refer to FRONT FOOTWELL CENTER CONSOLE TRIM PANEL, REMOVING AND INSTALLING .
- Replace any damaged or deformed clips
- Press the side trim panel back on until it audibly latches.
- Bolt
- 1.4 Nm
- Quantity: 8
- Tightening Sequence. Refer to Installing .
- Center Console
- Removing and installing. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- 3 Nm
- Bolt
- 3 Nm
- Quantity: 2
- Rear Bracket
- For the center console
- Removing and installing. Refer to CENTER CONSOLE BRACKET, REMOVING AND INSTALLING .
- Storage Compartment
- Equipped on some models
- Overview. Refer to OVERVIEW - CENTER CONSOLE .
- Bolt
- Tightening Specification. Refer to OVERVIEW - CENTER CONSOLE.