Subwoofer -R211-, REMOVING AND INSTALLING, BANG & OLUFSEN, SEDAN THROUGH 02/11/2013: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the rear shelf. Refer to appropriate service information. .
-- Open the luggage compartment.
-- Remove the Left Effects Speaker -R209-. Refer to EFFECTS SPEAKER -R209- / -R210-, REMOVING AND INSTALLING, BANG & OLUFSEN .
-- Release and disconnect the connector -2- from the Subwoofer -R211- -1-.
A ring with the spring elements is attached to the speaker housing. This must be removed first.
-- Remove the ring on the Subwoofer -R211- -1-.
-- Remove the bolts -arrows- from the Subwoofer -R211- -1- and remove the Subwoofer -R211- -1- from below in the luggage compartment from the rear shelf -3-.