Center Speaker 2 -R219-, REMOVING AND INSTALLING, BANG & OLUFSEN: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the center speaker trim. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .
-- Unclip the Center Speaker 2 -R219- -1- from the instrument panel.
-- Release and disconnect the connector from the Center Speaker 2 -R219- -1-.