Traffic Data Antenna, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
The connectors -1- for the Traffic Data Antenna -R173- -3- are located on the roof crossmember, behind the left sun visor. The flat band cable -2- is routed on the roof crossmember. The headliner must be removed in order to remove the flat band cable.
-- Remove the headliner. Refer to HEADLINER, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
Traffic Data Antenna -R173- removal:
A safety piece -2- secures the Traffic Data Antenna -R173- -1- to its bracket -3-. The bracket is glued to the windshield -3-.
-- Remove the safety piece -2- with a small screwdriver.
-- Remove the Traffic Data Antenna -R173- -1- from the bracket -3-.