Roof Antenna -R216-, REMOVING AND INSTALLING: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Screwdriver :VAG1624
The Roof Antenna -R216- has a maximum of four connections.
The antenna wires are connected directly to the base of the Roof Antenna -R216-.
The rear headliner must be removed/lowered in order to remove the Roof Antenna -R216-.