LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 922 (Entertainment System & Communication System (Service Information - 1 Of 2)) >> Communication >> Antenna Systems >> Bumper Antennas, Removing And Installing >> Removing

Bumper Antennas, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

Telephone Antenna -R65-, under the rear bumper cover on the left side.

-- Release and disconnect the connector -5- for the Telephone Antenna -R65- -1-.

GWWA91-12250Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -4- for the Telephone Antenna -R65- -1-.

-- Remove the Telephone Antenna -R65- -1- from the bracket -2-.

-- Remove the nuts -3- for the bracket -2-

-- Remove the bracket -2- from the body.

LTE Antenna 2 -R306- under the right rear bumper cover.

-- Release and disconnect the connector -5- for the LTE Antenna 2 -R306- -1-.

GWWA91-12316Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -4- for the LTE Antenna 2 -R306- -1-.

-- Remove the LTE Antenna 2 -R306- -1- from the bracket -2-.

-- Remove the nuts -3- for the bracket -2-

-- Remove the bracket -2- from the body.