Antenna Amplifier -R24-, REMOVING AND INSTALLING, AVANT: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the lower rear lid trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -1 and 3- on the Antenna Amplifier -R24- -2-.
-- Remove the bolts -4- and remove the Antenna Amplifier -R24- -2- from the rear lid.