Antenna Amplifier -R24- / Antenna Amplifier 4 -R113-, REMOVING AND INSTALLING, SEDAN: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the D-pillar trim panel. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -2 and 5- on the Antenna Amplifier -R24- -1-.
-- Remove bolt -3- and remove the Antenna Amplifier -R24- -1- from the D-pillar -4-.