Cigarette Lighter -U1-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
CAUTION:
Risk of injury.
- After removing the :T40148 , check to see if the lighter retaining tabs are bent.
- If the retaining tabs are bent, bend them back so the lighter does not slide out.
-- Remove the support -1- on the :T40148 .
-- Slide the piston down and hold it in place.
-- Turn the thumbwheel -4- on the :T40148 counter-clockwise in direction of -arrow-. This loosens the release tabs -2- on the cigarette lighter -3- so the :T40148 can be removed.