LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 920 (Transmission System (Controls & Housing - Service Information - 8-Speed Automatic - 0BK AWD)) >> 37 Controls, Housing >> Transmission, Removing And Installing >> Transmission Tightening Specifications >> Transmission Mount to 3.0L TFSI Engine

Transmission Mount to 3.0L TFSI Engine

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine to Transmission Bolts And Alignment Sleeves -A- (3.0L TFSI Engine)
GWWA34-10491Courtesy of AUDI OF AMERICA, LLC
Item Bolt Nm
1 M10 x 50 1) 65
2 2) , 7 M12x100 3) 30 + 90°
3 4) , 6 M12x75 3) 30 + 90°
4 and 5 4) M12x120 3) 30 + 90°
8, 10 M10x75 3) 15 +90°
9 M10x60 3) 15 +90°
11 M12x50 3) 30 + 90°
A Alignment sleeves for centering
  • 1) Also secures the starter. There is no limit to the number of times the steel bolt can be used again.
  • 2) Also secures the starter. With a spacer sleeve between the starter and the transmission. Refer to Starter Bolt and Spacer Sleeve .
  • 3) Aluminum bolts can be used twice. Refer to Aluminum Bolts .
  • 4) Also secures the wiring bracket
scientia non olet · About LEMON Manuals