Securing On Engine And Transmission Holder: Procedure
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Hold the transmission with the :VAS6100 . Refer to TRANSMISSION, TRANSPORTING .
-- Attach the :VW309A to the :3311 .
-- Place the transmission using the :VAS6100 in the :VAS6095 .
NOTE:
The vents for the transmission housing and final drive must be closed before turning a filled transmission with Automatic Transmission Fluid (ATF) pan upward on the engine/transmission holder.