Sunroof Lid: Adjustment
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Adjust the height between sunroof lid and roof panel.
Loosen the sunroof lid nuts, and then adjust the height by adding (max: four pieces) or extracting (min: zero pieces) shims (normally two pieces) which are installed between the sunroof lid and the roof panel.
Difference in height between sunroof and roof panel
2.0±1.0 mm (0.079±0.039 in)