LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 918 (Transmission System (Controls & Housing - Service Information - 7-Speed Dual Clutch - 0CK)) >> 34 Controls, Housing >> Transmission, Removing And Installing >> Transmission, Installing >> Procedure >> Vehicles with 4-Cylinder Engine

Vehicles with 4-Cylinder Engine

WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
GWWA34-10501Courtesy of AUDI OF AMERICA, LLC
NOTE:

The bolt -2- attaches the starter to the transmission and has an additional spacer sleeve -arrow-.

The spacer sleeve must be inserted between the starter and the transmission.

All Vehicles 

-- Install the starter. Refer to STARTER .

-- Tighten the remaining engine/transmission connecting bolts. Refer to Tightening Specifications .

GWWA34-11232Courtesy of AUDI OF AMERICA, LLC