Gearshift Mechanism on Transmission
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 3 Nm +90°
- Replace after removing
- Drive Position Sensor -G676- and Drive Position Sensor 2 -G869-
- Removing and installing. Refer to Drive Position Sensor -G676-, REMOVING AND INSTALLING .
- Seal
- Replace after removing
- Seal
- For the selector shaft
- Replacing. Refer to SELECTOR SHAFT SEAL, REPLACING .
- Gearshift Lever
- Removing and installing. Refer to SELECTOR SHAFT SEAL, REPLACING .
- Bolt
- 10 Nm +90°
- Replace after removing
- Cover
- For the selector shaft
- Bolt
- 8 Nm +60°
- Replace after removing