Drive Position Sensor -G676-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the Mechatronic. Refer to MECHATRONIC, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-, push aside the coolant pipe.

GWWA19-11949

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore items -1 and 2-.

-- Remove the ball socket -1- on the selector lever cable from the selector shaft lever using the :80-200 .

GWWA34-11233

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Do not bend or kink the selector lever cable.

Ignore item -2-.

-- Remove the bolt -2- and remove the gearshift lever -1- from the gearshift shaft.

GWWA34-11309

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the gearshift shaft cover -1-.

GWWA34-11307

Courtesy of AUDI OF AMERICA, LLC

-- Push the gearshift shaft seal from the gearshift shaft cover.

-- Remove the bolts -arrows- and remove the Drive Position Sensor -- -1-.

GWWA34-11308

Courtesy of AUDI OF AMERICA, LLC