LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 918 (Transmission System (Controls & Housing - Service Information - 7-Speed Dual Clutch - 0CK)) >> 34 Controls, Housing >> SUBFRAME Mount >> Transmission Mount, Removing And Installing >> Installing

Transmission Mount, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

-- Place transmission support -4- on the transmission mount -3-.

-- Install the nut -5- hand-tight.

-- Tighten the bolts -1- for the stopper -2-.

-- Tighten the nut -5-.

-- Install the transmission support and transmission mount. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals