Drain and Sealing Plug
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
- Sealing Plug
- Aluminum transmission fluid pan:
- 8 Nm +30°
- Plastic transmission fluid pan:
- Tighten all the way
- Replace after removing
- For the ATF check and fill hole
- Sealing Plug
- For transmission fluid inspection and fill hole
- Tightening specification, refer to -item 2- Sealing Plug (OVERVIEW - TRANSMISSION FLUID CIRCUIT ).
- Transmission Electric Pump 2 -V553- (Transmission Fluid Pump)
- Must be removed for draining the transmission fluid (MTF). Refer to TRANSMISSION FLUID PUMP, REMOVING AND INSTALLING
- Bolt
- Tightening Specification, refer to -item 4-.
- Drain Plug
- Aluminum transmission fluid pan:
- 35 Nm
- Plastic transmission fluid pan:
- Tighten all the way
- Replace after removing
- For the ATF