LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 917 (Exterior Trim System (Service Information)) >> Exterior Equipment >> Moldings, Trims, Extensions And Trim Panels >> Sill Panel Trim, Removing And Installing >> Removing

Sill Panel Trim, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles with fiber optic cable for ambient lighting:

-- Remove the front sill panel. Refer to appropriate service information. .

-- Remove the inner door seal from the body flange only at the bottom near the sill panel strip. Refer to INNER DOOR SEAL, REMOVING AND INSTALLING .

-- Disconnect the connector.

Continuation for All Vehicles: 

-- Carefully warm the sill panel strip -1- using the :VAG1416  .

GWWA66-10798Courtesy of AUDI OF AMERICA, LLC

-- Carefully pry off the sill panel -2- using the :3409  -arrow-.