Crankshaft Seal, Replacing, Belt Pulley Side: Notes
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Puller - Crankshaft Seal :T40019
- Assembly Tool :T40048A with Seal Installer - Crankshaft :T40048/7
- Assembly Device :T40048/1
- Pull Sleeve :T40048/2
- Seal Installer - Crankshaft :T40048/7
- M8 x 55 mm bolt, quantity: 2