LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 915 (Crankshaft, Cylinder Block- CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB) >> Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Auxiliary Components Bracket, Removing And Installing >> Removing

Auxiliary Components Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the Air Conditioning (A/C) compressor. Refer to A/C COMPRESSOR .

-- Remove the bolts -arrows- and the A/C compressor bracket.

GWWA13-10869Courtesy of AUDI OF AMERICA, LLC
NOTE:

Ignore items -1 and 2-.