Rear Hub Unit Bearing

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the four bolts from the rear housing, and remove the rear hub unit bearing and back plate.

Fig 1: Locating Rear Housing Bolts
Courtesy of SUBARU OF AMERICA, INC.
CAUTION:
- Be careful not to damage the magnetic encoder.
- Do not get closer the tool which charged magnetism to magnetic encoder.
  
  Fig 2: Front Hub Unit Bearing And Magnetic Encoder
  Courtesy of SUBARU OF AMERICA, INC.
Disassemble the rear hub unit bearing. < Ref. to DISASSEMBLY , Rear Hub Unit Bearing. >