LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Drive Axles & Propeller Shaft) >> Front Hub Unit Bearing >> Assembly

Front Hub Unit Bearing: Assembly

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach the hub to the ST securely.

    ST 927080000 HUB STAND

    Fig 1: Attaching Hub To ST Securely
    G07680218Courtesy of SUBARU OF AMERICA, INC.
  2. Using a press, press the new hub bolts until their seating surfaces contact the hub.
    NOTE: Use the 12 mm (0.47 in) dia. holes in the HUB STAND to prevent bolts from tilting.
scientia non olet · About LEMON Manuals