Rear Bushing

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Put an alignment mark on the front arm based on the center of rear bushing recess portion.
CAUTION: Always put an alignment mark for aligning the position on bushing installation.

Fig 1: Alignment Mark On Front Arm Based On Center Of Rear Bushing
Courtesy of SUBARU OF AMERICA, INC.
Using the ST and a press, remove the rear bushing.
ST1 20299AG000 REMOVER

ST2 20299AG010BASE

Fig 2: Pressing Rear Bushing
Courtesy of SUBARU OF AMERICA, INC.