Oil Pump Cover

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the four seal rings.

Fig 1: Seal Rings
Courtesy of SUBARU OF AMERICA, INC.
Remove attachment bolts, then remove the oil pump cover by lightly tapping the end of the stator shaft.

Fig 2: Oil Pump Cover And Oil Pump Housing
Courtesy of SUBARU OF AMERICA, INC.
Remove the oil pump inner rotor and outer rotor.

Fig 3: Oil Pump Inner And Outer Rotor
Courtesy of SUBARU OF AMERICA, INC.