One-Way Clutch Inner Race

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install the needle bearing to the inner race using the ST and a press.
ST 398497701 INSTALLER

Fig 1: Installing Needle Bearing To Inner Race Using ST
Courtesy of SUBARU OF AMERICA, INC.
Install two seal rings to the one-way clutch inner race.
NOTE:
- Use a new seal ring.
- Apply vaseline to the groove of inner race and to the seal ring.
  
  Fig 2: Seal Rings And One-Way Clutch Inner Race
  Courtesy of SUBARU OF AMERICA, INC.