LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Clutch System) >> Clutch Pipe and Hose >> Removal

Clutch Pipe and Hose: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air intake boot assembly. < Ref. to REMOVAL , Air Intake Boot . >
  2. Drain the clutch fluid. < Ref. to CLUTCH FLUID . >
  3. Disconnect the clutch pipe from the clutch hose and master cylinder.
  4. Pull out the clamp, then disconnect the clutch hose from the bracket.
    Fig 1: Clamp And Clutch Hose
    G07680123Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the clutch hose from operating cylinder.
  6. Remove the bracket.
scientia non olet · About LEMON Manuals