LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Clutch System) >> Clutch Pedal >> Removal

Clutch Pedal: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the steering column. < Ref. to REMOVAL , Steering Column . >
  3. Disconnect the connector from the stop light switch and clutch switch.
  4. Remove the snap pins from clevis pins which secure the lever to the push rod and operating rod.
  5. Pull out the clevis pins which secures the lever to the push rod and operating rod.
    Fig 1: Operating Rod, Push Rod, Snap Pin And Clevis Pin
    G07680129Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the air intake boot assembly. < Ref. to REMOVAL , Air Intake Boot . >
  7. Remove the nut which secures the clutch master cylinder.
    Fig 2: Clutch Master Cylinder With Nut
    G07680130Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the bolts and nuts which secure the brake pedal and clutch pedal, and remove the pedal assembly.
scientia non olet · About LEMON Manuals