LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Engine Cooling System (H4DO)) >> Thermostat >> Installation

Section 82 (Engine Cooling System (H4DO)): Thermostat: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a gasket to thermostat.
    NOTE: Use a new gasket.
  2. Install the thermostat and thermostat cover.
    NOTE: Use a new gasket.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

    Fig 1: Thermostat Cover, Gasket And Thermostat
    G07665029Courtesy of SUBARU OF AMERICA, INC.
  3. Connect the radiator outlet hose to thermostat cover.
    Fig 2: Locating Radiator Outlet Hose Clamp
    G07665030Courtesy of SUBARU OF AMERICA, INC.
  4. Install the front exhaust pipe. < Ref. to INSTALLATION , Front Exhaust Pipe. >
  5. Install the under cover. < Ref. to INSTALLATION , Front Under Cover. >
  6. Lower the vehicle.
  7. Connect the battery ground terminal.
    Fig 3: Connecting Battery Ground Terminal
    G07665031Courtesy of SUBARU OF AMERICA, INC.
  8. Fill engine coolant. < Ref. to FILLING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant. >
scientia non olet · About LEMON Manuals