Crankshaft Position Sensor: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the collector cover.
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt which secures crankshaft position sensor to oil pump.

Fig 2: Locating Bolt And Crankshaft Position Sensor To Oil Pump
Courtesy of SUBARU OF AMERICA, INC.
Remove the sensor, and then disconnect the connector from the crankshaft position sensor.

Fig 3: Locating Crankshaft Position Sensor Connector
Courtesy of SUBARU OF AMERICA, INC.