Camshaft Position Sensor LH

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the collector cover.
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the intake manifold. < Ref. to REMOVAL , Intake Manifold. >
Remove the camshaft position sensor LH.

Fig 2: Locating Camshaft Position Sensor Bolt
Courtesy of SUBARU OF AMERICA, INC.