Throttle Body: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Use a new gasket.

Tightening torque:

8.3 N.m (0.8 kgf-m, 6.1 ft-lb)

Fig 1: Locating Intake Manifold Mounting Bolts

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

3 N.m (0.3 kgf-m, 2.2 ft-lb)

Fig 2: Locating Clamp Bolts

Courtesy of SUBARU OF AMERICA, INC.