Fuel Pump (FP) delivery quantity, checking
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools, testers and auxiliary items required
- Adapter V.A.G 1318/17-1 from adapter set V.A.G 1318/17
- Remote control V.A.G 1348/3A with adapter cable V.A.G 1348/3-2
- Fuel-resistant measuring container
Test conditions
- Battery voltage at least 12.5 V.
- Fuel filter OK
- Fuel tank at least 1 /4 filled.
- Fuel pressure regulator OK, checking →
- 24 MULTIPORT FUEL INJECTION (MFI) for 1.8 LITER 4-CYL. 5V TURBO FUEL INJECTION & IGNITION, ENGINE CODE(S): AMB
- 24 - MULTIPORT FUEL INJECTION (MFI) for 2.0 LITER 4-CYL. 4V TURBO FUEL INJECTION IGNITION, ENGINE CODE(S): BPG, BWT
- 24 MULTIPORT FUEL INJECTION (MFI) for 3.0 LITER 6-CYL. 5V FUEL INJECTION & IGNITION, ENGINE CODE(S): AVK, BGN
- 24 - FUEL INJECTION SYSTEM for 3.2 V6 4V FUEL INJECTION IGNITION, ENGINE CODE(S): BKH
- 24 - MULTIPORT FUEL INJECTION (MFI) for 4.2 LITER V8 4V FUEL INJECTION AND IGNITION, ENGINE CODE(S): BNS
- 24 MULTIPORT FUEL INJECTION (MFI) for 4.2 LITER V8 5V FUEL INJECTION AND IGNITION, ENGINE CODE(S): BHF
- Ignition switched off.
Test sequence
- Open fuse box cover at left side of instrument cluster.
- Pull out fuse on fuse panel S228 (left row, 5th large fuse from top).
Fig 3: Connecting Remote Control V.A.G 1348/3A With Adapter Cable V.A.G 1348/3-2 To Right Socket Terminal Of S228
- Connect remote control V.A.G 1348/3A with adapter cable V.A.G 1348/3-2 to right socket terminal of S228.
- Connect alligator clip to vehicle battery (+).
- Remove fuel filler cap from fuel filler tube.
- Remove rear seat bench →
- 72 - SEAT - FRAMES
- 72 - SEAT - FRAMES for BODY INTERIOR - CABRIOLET
- Unbolt cover for left locking flange - arrows -.
CAUTION:
The fuel system is under pressure! Before opening system, place rags around the connection area. Then release pressure by carefully loosening the connection.
- Pull fuel line - arrow - off from left locking flange, by pressing release button.
- Connect adapter V.A.G 1318/17-1 to disconnected fuel line and hold it in a measuring container.
- Press switch on remote control for 15 seconds.
- Compare quantity of fuel delivered with minimum delivery rate in diagram (cm 3 /15s).
NOTE:
- Voltage at fuel pump with engine stopped and pump running is approx. 2 volts less than battery voltage.
Installation is in reverse order of removal. Note the following:
- Install fuel return line.
- Install rear seat bench →
- 72 - SEAT - FRAMES
- 72 - SEAT - FRAMES for BODY INTERIOR - CABRIOLET