LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Fuel Supply System) >> 20 - Fuel supply system >> EVAP canister/leak detection system, servicing (Front and all wheel drive vehicles) >> Leak Detection Pump (LDP) V144 , checking (vehicles with MPI-engine) >> Checking input wiring

Checking input wiring

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Connecting Test Box V.A.G 1598/31 To Wiring Harness Connectors, With Engine Control Module (ECM) Not Connected
GW00017007Courtesy of VOLKSWAGEN UNITED STATES, INC.
CAUTION: To avoid damaging electronic components, switch to the corresponding measuring range and observe all test conditions before connecting the test leads.
Fig 2: Identifying 3-Pin Connector Terminals 1 & 3
GW00000673Courtesy of VOLKSWAGEN UNITED STATES, INC.
Harness connector Terminal Test box V.A.G 1598/31 Socket
- - 80