LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Fuel Supply System) >> 20 - Fuel supply system >> EVAP canister/leak detection system, servicing (Front and all wheel drive vehicles) >> EVAP system, checking using tester KLI 9210 >> Introduction

EVAP system, checking using tester KLI 9210: Introduction

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

The KLI 9210 EVAP tester allows testing using nitrogen to pressurize the EVAP system and a smoke generator or ultrasonic tester to locate the source of EVAP system concerns.

This procedure is intended as a general guide for the use of the EVAP tester. EVAP systems vary between models.

Special tools, testers and auxiliary items required 

Using the KLI 9210 EVAP system tester → Tester operating instructions

scientia non olet · About LEMON Manuals