Radiator Main Fan and Fan Motor: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

CAUTION: Check if the radiator hose and the over flow hose are properly connected.

Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

Fig 1: Locating Bolts Which Secure Radiator Main Fan Motor Assembly And Over Flow Pipe

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

3 N.m (0.3 kgf-m, 2.2 ft-lb)

Fig 2: Locating Radiator Heat Shield Cover Bolts

Courtesy of SUBARU OF AMERICA, INC.